Greasing Solutions

Which LockNFlate® Air Chuck do I need? Open Flow or Closed Flow?

A common questions we get from customers is "Which LockNFlate® Air Chuck do I need? Open Flow or Closed Flow?" In this video, Jay explains the difference so you can...

How to Load and Prime a Grease Gun

In this comprehensive update to our most-viewed video, we'll guide you through the essential steps of loading and priming your grease gun. Whether you're a beginner or an experienced user,...

The LockNLube® Grease Coupler wins again! 🏆

Tools Tested pulled together every locking grease coupler available and compared them head-to-head. Of course, the LockNLube® Grease Coupler came out as the winner! The original LockNLube® Grease Coupler with...

Combined with the LockNFlate® Air Chuck, this Digital Inflator/Deflator makes airing up tires a breeze!

Heavy-duty, aluminum diecast inflation/deflation gun with flexible stainless steel hose and included LockNFlate® Air Chuck! Check out the video below to learn more!

Tools Tested

How does the LockNFlate® Air Chuck standup to the competition? Tools Tested pulled together the leading air chucks and compared them head-to-head. Watch the full video below to see how the LockNFlate...

Colby Tire Valves

Colby Tire Valves are hands down the MOST CONVENIENT, ONE OF THE STRONGEST, and EASIEST TO INSTALL replacement vehicle tire valves on the planet. The Colby Valve was invented in...

What are the origins of the Schrader valve?

We've all seen the ubiquitous Schrader valve, the standard tire valve of our childhood bicycles and later our cars and trucks. But where did it come from? The good folks...

GREASE GUN BATTLE!

What does the "rated to" pressure on a grease gun really mean, and how does that compare to general operating pressures? Join Jay as he walks us through the differences...

GCSAA TV's Inside the Shop presented by Hector Velazquez

courtesy of Inside the Shop Episode 33: Overgreasing This episode of Inside the Shop presented by Hector Velazquez focuses on grease, diving into the grease zerk and how much grease is too...

Will the LockNLube® Grease Coupler fit my grease gun? Yes!

The LockNLube® Grease Coupler is compatible with all grease guns and grease fittings. It does not leak once locked on and will not pop off under pressure. No hands are needed...

Grease Separation and Dripping

A frequent question we hear from our customers is "How can I stop my grease gun from dripping on my shop floor?" As anyone with a conventional T-handle grease gun knows,...

Best Built Guarantee - Returns & Warranty

If our products don’t work better and last longer than anything out there, we’ll make it right. If you aren’t satisfied with anything you buy from LockNLube, send it back...

G. Gun Releases 10,000 PSI with No Mess

The G. Gun patented pressure return valve, takes 10,000 PSI from a 10-foot hose and returns it to the canister with no mess. The pressure drops to 0 PSI in...

Priming a Grease Gun and Troubleshooting Air Pockets

Priming a grease gun is not a tough task when you know a few tricks to bleed air from the grease gun and get the grease moving easily through the...

G. Scoop - The Clean & Easy Way to Move Bulk Grease

The G. Scoop makes it easy to load your G. Gun and move bulk grease, without spending loads of money on an expensive pump unit. The G. Scoop moves pounds of...

How to Use a Grease Fitting Thread Tester

If you work with SAE, metric, National or British Pipe Thread grease Zerks, the Thread Tester will save you lots of time and frustration. When you're running multiple machines with a...